Tycho Solutions designs and installs solar panel installation in Chandler, AZ, on new builds and existing homes. Modeled to your usage, not a stock package.
Most Chandler homes went up between the late 1980s and the 2000s, with concrete tile roofs common on primary structures and asphalt shingle showing up on additions, patios, and post-2010 builds. Concrete tile sheds granules and cracks under decades of UV exposure and monsoon hail, and the underlayment beneath it fails long before the tile itself looks bad. Since a rooftop solar array is meant to outlast that underlayment by fifteen to twenty years, we check roof condition before we mount a single rail.
If the deck or underlayment is already near end of life, we flag it before install rather than bolting a new system to a roof that will need to come apart again in a few years.
We model your actual usage and roof, then show you the production and payback before you commit to anything.
From new panel installation to battery storage and EV charging, our Chandler team designs and installs complete solar systems built for local homes, businesses, and building codes.
On a Chandler roof, panel installation starts with a layout that works around vents, valleys, and HOA sightline rules, then racking rated for our roof types and wind load. We route conduit, seal every penetration, and tie the array into your electrical panel before scheduling inspection.
A new solar system for a Chandler home starts with a load calculation built around real summer usage, not a generic package. We size the array and inverter for your roof’s orientation, keep panel layout within HOA guidelines where they apply, and commission the finished system for full production.
EV charger jobs in Chandler usually mean a dedicated circuit run from the main panel to the garage, a load calculation to confirm the panel can handle it, and a Level 2 charger mounted and wired to work alongside your solar system for daytime charging.
Chandler’s summer storms and monsoon outages make battery backup practical, not just nice to have. We size the battery to carry the circuits you actually need, mount it in a code-compliant location with proper clearance, and wire it to switch over automatically when the grid drops.
Off-grid work in the Chandler area usually involves a detached structure such as a workshop, casita, or barn that sits away from the main service panel. We design a standalone system with its own battery bank sized for the actual loads out there, no utility interconnection required.
Chandler’s business corridor, from office parks near the tech employers to warehouses and retail buildings, gives us plenty of roof and lot space for commercial arrays. We size systems to offset demand charges, work with roof-mount or ground-mount carport structures, and coordinate three-phase interconnection with the utility.
Chandler builders and homeowners bring us solar jobs because we run electrical, roofing, and structural work under one crew instead of handing pieces to separate subcontractors. That means one load calculation, one roof penetration plan, and one team accountable for how the array, battery, and roof deck perform together over the long term.
Every Chandler installation carries manufacturer and workmanship coverage we stand behind, not through a call center, so a warranty claim gets a crew, not a ticket number.
One Tycho crew manages permitting, City of Chandler inspection scheduling, and utility interconnection paperwork, so you are not chasing three companies to get your system turned on.
We spec racking, conduit, and mounting hardware rated for Sonoran Desert heat and monsoon wind loads, not generic parts sized for a milder climate.
Chandler’s housing stock ranges from 1980s and 1990s single-story ranch homes with concrete tile roofs to newer stucco-and-tile subdivisions built after 2010, plus a steady run of new-construction lots still going up on the city’s east side. Older tile roofs carry more weight and more roof penetrations to route around, while newer builds often have simpler roof lines that make for cleaner array layouts and shorter conduit runs.
The point that actually fails on a roof-mounted solar system is rarely the panel itself. It is the flashing and sealant around each mounting foot, and on tile roofs, the hangers and tile hooks that route load down to the rafters. We flash every penetration to shed water the way the original roofer intended, then verify it holds before the array goes on, since a leak at a mounting point shows up as a stain on drywall two rooms away, not at the roof.
Design guidelines in many Chandler communities restrict where panels can sit relative to the street-facing roof plane and require conduit routed out of view from the front elevation. We plan the layout around those rules before we submit for permit, using low-profile conduit, roof-color flashing, and panel placement that keeps the array off the visible slope wherever the roof geometry allows it.
By submitting this form, you agree to receive communications from Tycho Solutions. We respect your privacy.
Tycho Solutions holds Arizona ROC #364735 and carries bonding and insurance on every Chandler solar job, residential or commercial.
We design and install complete Chandler solar systems, panels, inverter, wiring, and battery, as one coordinated build, not a bolt-on part.
Every Chandler solar job is permitted, inspected, and signed off by the city before we call it finished.
We schedule Chandler solar installs around permit and inspection timelines we already know, so your project moves without surprise delays.
The real number depends on your roof type, how much of your usage you want to offset, and whether you add battery backup, so anyone quoting a flat price before seeing your roof and utility bill is guessing. We build a load calculation from your actual summer usage, then price a system sized to that number rather than a generic package, and walk you through the full proposal before any contract is signed.
If your panels or inverter are more than a decade old, a spot repair usually buys you a season before the next failure, especially once the inverter itself is the weak point. A solar system upgrade in Chandler, new panels, a current inverter, and battery if you want it, gets you back under full manufacturer coverage instead of patching a system that is already near the end of its service life.
Yes. Flat and low-slope roofs are common on newer Chandler construction and on commercial buildings, and they actually simplify some of the layout work since we can angle the racking to the optimal tilt instead of following whatever pitch the roof happens to have. We seal every mounting point to the roof membrane rather than the shingle or tile details used on a pitched roof, since flat roofs fail differently when water gets under a penetration.
We do, from small office roofs to full warehouse and retail arrays along Chandler’s business corridors. Commercial jobs bring their own load calculations, often three-phase service, structural review for roof-mounted weight, and a longer permitting path through the city, and we manage all of it as one project instead of handing pieces off to separate contractors.
Yes. Tycho Solutions holds Arizona ROC #364735, and every Chandler solar job is pulled through the city’s permitting process and inspected before we sign off. That covers the electrical work, the structural mounting, and the utility interconnection paperwork, so you are not left holding an unpermitted system when it comes time to sell the house or file an insurance claim.
Yes, and it is easier to do well before drywall goes up than after. Solar for new construction in Chandler lets us run conduit inside the wall cavities, place the inverter and battery in the electrical room during rough-in, and coordinate panel wiring with the roofer before shingles or tile go down, instead of retrofitting all of that onto a finished house.
