Tycho Solutions is a licensed window replacement contractor and door installer serving homeowners and builders across the Valley, from full glass packages on new construction to retrofit installs on existing openings. We treat windows and doors as one coordinated trade, matching frame profiles, hardware finishes, and glass specs across the whole exterior so nothing looks bolted on after the fact.
In modern Arizona architecture, windows are more than just openings: they are a critical part of the building envelope. At Tycho Solutions, we specify glass packages and frame systems by orientation and exposure, not a single spec sheet for the whole house, because a west facing wall of glass carries a very different heat load than a shaded north elevation.
Our installation teams are experts in both new construction and retrofit replacement methods, ensuring proper flashing, waterproofing, and structural blocking at every opening. On a retrofit, we cut the old frame down to the rough opening, dry in the wall, and set the new unit plumb and square before a single bead of sealant goes down.
Sized and installed for new builds, additions, and major remodels, matching sightlines across the whole elevation.
Low-E glass packages and warm edge spacers engineered for west facing desert exposure and triple digit summer heat.
Complete window and door supply and installation for custom homes, ordered off the plan set and staged to arrive right after rough framing so your builder never loses a day waiting on product.
Installation of multi-slide and pocket door systems on reinforced header beams and flush thresholds, built to carry panels that can weigh several hundred pounds without binding or dropping out of plumb over time.
We supply and install custom shaped windows for unique architectural features: arches, circle tops, and raked glass cut and glazed to the exact rough opening, not a stock size forced into a custom frame.
We install new low-E windows directly into existing openings, cutting the old frame out down to the rough opening without tearing into stucco or drywall, then resealing and flashing the new unit to manufacturer spec.
From storefront systems to multi-unit projects, we supply and install tempered and code stamped glass built to spec for Arizona commercial construction, with cut sheets and calculations ready for the building department.
These door systems are designed to match your window package, from the frame profile down to the hardware finish, for one seamless exterior look.
We layer self-adhered flashing tape, back dam pans, and sealant beads in the order the manufacturer specifies, so water sheds out at the sill instead of tracking behind the framing and showing up as a stain on the drywall months later.
We coordinate with framing, stucco, and drywall crews so window and door install lands at the right point in the build sequence and never holds up the trades behind us.
Our installers are factory trained on the product lines we carry, so every install meets the manufacturer’s install spec and keeps your warranty intact instead of voiding it on a technicality.
Every window and door we install meets or exceeds Arizona’s energy code requirements for new construction, verified against the U-factor and SHGC ratings stamped on the NFRC label before the unit ever leaves the truck.
Building a new home, remodeling, or replacing windows and doors across the Valley? Contact us for a detailed project proposal.
By submitting this form, you agree to receive communications from Tycho Solutions. We respect your privacy.
Vinyl, thermally broken aluminum, and fiberglass all perform well in our climate. Vinyl resists our UV exposure without warping, while aluminum and fiberglass hold up better on larger multi-slide openings that need a stiffer frame.
Absolutely. We handle both new construction installs and retrofit installs for existing homes. Retrofit is one of our specialties, since much of the Valley’s housing stock predates current energy code and is still running single pane glass.
Low-emissivity glass carries a microscopically thin metallic coating that reflects heat back outside while still letting visible light in. It’s what lets a window meet Arizona’s energy code without going to a smaller glass area.
Custom windows can run six to twelve weeks lead time from order to delivery. We recommend placing the order as soon as framing begins so the windows arrive right when the rough openings are ready for them.
Yes, multi-slide and pocket door systems are one of our specialties, especially on modern Arizona homes designed to open the great room straight onto the back patio.
Contact Tycho Solutions for professional window and door installation anywhere across the Valley, on new construction, remodels, or a straight retrofit.
